How it works!

Base and Riser Post

The Rod Select 360 is a boat mounted fishing rod holder. It is designed to be easily positioned to keep your fishing rods safe and out of your way when you are not using them.

The RS360 mounts to your boat with a 4 1/2″ diameter base. Depending on your boat set-up, just decide the most convenient place to mount the rod holder. It is anchored to the boat with four 5/16″ diameter bolts.

Swivel (or hinge)

The rod holder unit is attached to the base with a “swivel” that loosens and tightens with 1/2 turn of the handle.  When the “swivel” is loosened, the rod holder will pivot 360 degrees around the riser post, or at any angle from horizontal to vertical.  You can have them pointing one direction while you are fishing, then another position while traveling on the water.  It only takes a few seconds to reposition them!

Spring Clamp for rod handle.

The RS360 holds 5 fishing rods at a time. To insert a fishing rod, simply lift the “Pull Knob” and put the rod handle into the wheel. The spring loaded clamp secures the handle of your fishng rod.

Molded pockets to secure you fiberglass fishing rod body.

Then press the fishing rod body into the plastic pocket provided. The rod holder is designed to hold medium to small diameter fishing rods. Your larger bass fishing rods will push in a little harder, and your light- weight crappie/pan-fish rods will snap in easier. All of these medium size rods should stay securely in place whether you are trolling your favorite fishing spot, or traveling at high speeds trying to get to that spot!


Lastly, the bumper is also custom molded and is used to keep the tips of your fishing rods from hitting together at high speeds on the lake or on the highway.  The rod tips just rest in the pockets provided. They are not designed to have the fishing rod snap into place and be retained.